DESCRIPTION

Impact shock absorber flat band, made of high tenacity polyester 1 '' wide, designed to dissipate the force and limit the distance of free fall of the worker. Provides 100% connection. Its striking color facilitates rapid remote monitoring of its use. This equipment is elaborated under strict quality standards that offers an appropriate operation to be used.

INSPECTION

Make the inspection a routine before and after each use. Always check your equipment for damage, deterioration or malfunction. Additionally, an inspection plan must be prepared by qualified personnel. A written and / or electronic record of that inspection must be filed.

MAINTENANCE

Wash by hand with warm water and neutral soap, dry hanging always in the shade. Store your equipment in a dry place, free of corrosive and dangerous gases, as well as out of direct contact with sunlight.

CHARACTERISTICS

Model: SAW-DG18
System: Against falls
Band: High tenacity polyester 1 '' wide
Hooks: Large steel
Mechanism: Double insurance
Length: 1.83mts
Maximum elongation: 1.07mts / 42 "
Product weight: 1.250kgs / 2.76lbs
Capacity: 140kgs / 310lbs
Maximum force of fall: 408kgs / 900lbs
Resistance to tension: 2,722kgs / 6,000lbs
Color: Yellow with red
Other lengths: SAW-DG12: 1.20mts
                                SAW-DG15: 1.50mts
Type: Double leg with large '' Rebar '' hooks
Standard: ANSI Z359.1
NOTE: Complies with Federal Motors International Standard FMVSS302

Life line shock absorber double large hook Datasheet